Oracle X6 series Page 44 Administration Manual Download

Page: 44 / 126

Set SP Host Power Policy at Boot

Oracle X6 Series Servers Administration Guide • April 2016

In the Actions drop-down list, select Enable.

To set a power-on policy in the Oracle ILOM command-line interface (CLI),

perform the following steps:

Log in to the Oracle ILOM CLI.

For instructions, see

“Accessing Oracle ILOM” on page 21

Use one of the following commands:

■

set /SP/policy HOST_AUTO_POWER_ON=enabled

■

set /SP/policy HOST_LAST_POWER_STATE=enabled

The power-on policies are mutually exclusive, that is, only one can be enabled at a time.

For more information about each policy, see the Related Information section following this

procedure.

Related Information

■

Power-On and Cooling-Down Policies Configurable from the Server SP,

Oracle ILOM

Administrator's Guide for Configuration and Maintenance, Firmware Release 3.2.x

Summary of Contents for X6 series































































































































Search results

Summary of Contents for X6 series

Reviews:

Related manuals for X6 series

Brands by name

Popular brands

Oracle X6 series, Administration Manual

Search results

Summary of Contents for X6 series

Reviews:

Related manuals for X6 series

Brands by name

Popular brands