Oracle X6 series Page 56 Administration Manual Download

Page: 56 / 126

Configure RAID (Oracle Hardware Management Pack)

Oracle X6 Series Servers Administration Guide • April 2016

including the OS. If you change the RAID configuration on a boot drive, you must reinstall

the OS.

Tool

Description

Supported RAID Levels

Documentation

Oracle Hardware

Management Pack

See

“Oracle Hardware Management

Pack” on page 17

. Command-line server

management tool that can be used to configure

drives (except boot drives) after the operating

system has been installed.

Review the output of the

raidconfig list controller

subcommand.

MegaRAID Command

Tools

Command-line RAID configuration

application that must be installed on the server

after the operating system has been installed.

■ RAID 0
■ RAID 1
■ RAID 5
■ RAID 6
■ RAID 00
■ RAID 10
■ RAID 50

MegaRAID SAS Software

User Guide

at:

http://www.lsi.com/
sep/Pages/oracle/
index.aspx

Configure RAID (Oracle Hardware Management

Pack)

Before you begin, ensure the following:

■

The disk drives have been properly installed on the server.
For more information, review the server service manual.

■

The host bus adapter (HBA) installed on the server is supported.
A list of supported HBAs is provided in the server product notes.

■

If the server is running a UNIX-based platform, you have

root

permission.

■

If the server is running Windows, you have

administrator

privileges.

■

If the server is running the Oracle Solaris operating system, note the following:

■

On Oracle Solaris,

raidconfig

is not compatible with the

raidctl

CLI tool.

raidconfig

supports SAS2, but the

raidctl

tool does not.

■

For servers running Oracle Solaris, after hot-plugging any device, run the

devfsadm -C

command to reenumerate all of the system device nodes before running the

raidconfig

command.

Caution -

Changing the RAID configuration erases all the data on the affected drives, including

the OS. If you change the RAID configuration on a boot drive, you must reinstall the OS.

Access the operating system command line.

For more information, see

“Accessing Oracle Hardware Management Pack” on page 31

Summary of Contents for X6 series































































































































Search results

Summary of Contents for X6 series

Reviews:

Related manuals for X6 series

Brands by name

Popular brands

Oracle X6 series, Administration Manual

Search results

Summary of Contents for X6 series

Reviews:

Related manuals for X6 series

Brands by name

Popular brands