Oracle X6 series, Administration Manual

Page: 104 / 126

Back Up the Current BIOS Firmware Configuration (Oracle Hardware Management Pack)
104 Oracle X6 Series Servers Administration Guide • April 2016
b.
Use the
set
command:
set /SP/config passphrase=
passphrase
include_faultdata=[
true|false
] dump_uri=
transfer_method://username:password@host/filepath
Where:
■
passphrase
is a passphrase used to encrypt sensitive data in the backup file. If you
specify a passphrase, the passphrase is required to restore the backed up configuration.
If you do not specify a passphrase, sensitive data is not included in the backup file.
■
include_faultdata=true
includes fault data in the backup. The default is
false
.
Note -
The fault data backup and restore is reserved for Oracle service personnel when
they replace the SP. It is available with Oracle ILOM 3.2.6 or newer.
■
transfer_method
is one of the following protocols:
tftp
,
ftp
,
sftp
,
scp
,
http
, or
https
.
■
username
and
password
are your credentials on the remote system where the backup
file will be saved.
■
host
is the IP address or hostname of the system where the backup file will be saved.
■
filepath
is the relative path to the backup file.
Note - If you transfer the backup file using TFTP, you do not need to provide a
username
or
password
.
Related Information
■
Back Up the Oracle ILOM Configuration File, Oracle ILOM Administrator's Guide for
Configuration and Maintenance, Firmware Release 3.2.x at
http://www.oracle.com/
goto/ilom/docs
Back Up the Current BIOS Firmware Configuration
(Oracle Hardware Management Pack)
1. Access the operating system command-line interface.
For more information, see “Accessing Oracle Hardware Management Pack” on page 31 .
2.
Use the
ubiosconfig export
command:
ubiosconfig export all --xmlfile=
filename
.xml