Oracle X6 series Page 89 Administration Manual Download

Page: 89 / 126

Monitor Server Power Consumption and Component Temperatures

Monitor Server Power Consumption and

Component Temperatures

This section describes how to monitor the amount of power the server consumes and the

temperature of the air entering and leaving the system.

Task

Link

View current server power consumption and historical

power consumption data.

“Monitoring Server Power Consumption” on page 89

View server inlet and exhaust temperatures, or enable the

Enhanced PCIe Cooling Policy.

“Monitoring Server Inlet and Exhaust

Temperature” on page 92

Monitoring Server Power Consumption

Oracle ILOM provides the following power metrics for the server:

■

Power Supply Maximum

: The maximum amount of power the power supply units (PSU)

can draw.

■

Allocated Power

: The power allocated for installed and hot-pluggable components.

■

Actual Power

: The amount of power the server is currently consuming.

■

Peak Permitted

: The maximum power the server can consume at any time.

In addition, you can view historical power consumption data from the Oracle ILOM web

interface.

To view server power metrics, see the following procedures:

■

“View Current Server Power Consumption (Oracle ILOM)” on page 90

■

“View Power Allocated to Server Components (Oracle ILOM)” on page 90

■

“View Historical Power Consumption Data (Oracle ILOM)” on page 91

Summary of Contents for X6 series































































































































Search results

Summary of Contents for X6 series

Reviews:

Related manuals for X6 series

Brands by name

Popular brands

Oracle X6 series, Administration Manual

Search results

Summary of Contents for X6 series

Reviews:

Related manuals for X6 series

Brands by name

Popular brands