Oracle X4 series Administration Manual Download Page 142

Page: 142 / 240

Importing and Exporting Hardware Configuration (Oracle System Assistant 1.2)

Click the Configure Hardware task button.

Click the BIOS Configuration tab.

Select a backup or restore option from the drop-down list.

The back up and restore options are:

■

Backup (Export XML file)

■

Restore (Import XML file)

■

Restore to Factory Settings

For the backup option and the restore option, select a transfer method. To

restore to factory settings, click the Factory radio button.

The transfer method options include:

■

Local drive

■

TFTP

■

FTP

■

SFTP

■

SCP

■

HTTP

■

HTTPS

For the file-based options, browse for a file location.

For the file-based options, click Run; for the Restore to Factory option, click

Apply.

Changes to the BIOS settings are applied during the next server boot.

See Also

■

For BIOS screen details, see your server service manual.

Importing and Exporting Hardware Configuration (Oracle

System Assistant 1.2)

This section provides instructions for importing and exporting RAID, Oracle ILOM, and BIOS

hardware configuration information.

This feature can be used to backup and restore configuration information and to migrate it to a

different system.

142

Oracle X4 Series Servers Administration Guide • April 2016

Summary of Contents for X4 series

















































































































































































































































Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands

Oracle X4 series, Administration Manual

Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands