Oracle X4 series Administration Manual Download Page 118

Page: 118 / 240

Install an Operating System (Oracle System Assistant)

Action

Oracle System Assistant

Without Oracle System Assistant

“Configure MOS to Enable

Oracle System Assistant

Updates” on page 168

Configure Oracle ILOM.

“Configuring Oracle ILOM Network

Settings” on page 87

See your Oracle ILOM

documentation at:

http://www.oracle.com/goto/
ilom/docs

Download and Install Updates of

Platform Software, Drivers, and

Firmware

“Update Oracle System Assistant

and the Firmware Files on the

Oracle System Assistant USB Drive

(Oracle System Assistant Release

1.1)” on page 225

“Update Software and

Firmware (Oracle System

Assistant)” on page 226

“Getting Firmware and Software

From MOS” on page 233

“Updating Server or Blade

Chassis Firmware (Oracle

ILOM)” on page 229

Configure RAID

Note -

There are many ways to

configure RAID. This section

provides instructions for using

Oracle System Assistant as well as

other options.

Install the Operating System.

“Install an Operating System (Oracle

System Assistant)” on page 118

See your operating system

installation guide.

Install an Operating System (Oracle System Assistant)

Oracle System Assistant is the preferred method of installing an operating system and drivers,

as it provides a complete suite of tools for preparing the system, installing the operating system,

and updating the drivers.

Note -

Oracle System Assistant Operating System installation task is available only for

supported versions of

Solaris

Windows

, and

Linux

operating systems, and

Oracle VM

software. For Windows, only the Full Installation options are supported. (The Server Core

Installation options are not supported). For more information about installing a supported

operating system, refer to the operating system-specific installation guide for your server.

118

Oracle X4 Series Servers Administration Guide • April 2016

Summary of Contents for X4 series

















































































































































































































































Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands

Oracle X4 series, Administration Manual

Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands