Oracle X4 series Administration Manual Download Page 190

Page: 190 / 240

Access the BIOS Setup Utility Menus

■

“Set UEFI Late Synchronization” on page 195

The following table describes the top-level BIOS Setup Utility menu tabs.

Menu

Description

Main

Includes general product information, including memory, time and date,

security settings, system serial number, and CPU and DIMM information.

Advanced

Provides configuration settings for the CPU, including trusted computing,

USB, and others.

Enable and disable Option ROMs.

Boot

Enable or disable internal Oracle System Assistant support, set the boot mode

to Legacy or UEFI, and configure the boot device priority.

UEFI Driver Control

Appears only if the boot mode is set to UEFI Boot Mode. Only UEFI boot

options are present to the user.

Save and Exit

Save changes and exit, discard changes and exit, discard changes, or load

optimal or fail-safe defaults.

Related Information

■

“Access the BIOS Setup Utility Menus” on page 190

■

“Navigate the BIOS Setup Utility Menus” on page 193

Access the BIOS Setup Utility Menus

Before You Begin

Select one of the following access interfaces:

■

Use a USB keyboard and VGA monitor connected directly to the server. (A mouse is not

required to operate the BIOS Setup Utility.)

■

Use a terminal or terminal emulator connected to a computer through the serial port on the

back panel of the server.

■

Connect to the server using the Oracle ILOM Remote Console application.
For details, see

“Launch a Remote System Console Redirection Session” on page 43

The following picture shows the connection interfaces in a blade system.

190

Oracle X4 Series Servers Administration Guide • April 2016

Summary of Contents for X4 series

















































































































































































































































Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands

Oracle X4 series, Administration Manual

Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands