Oracle X4 series, Administration Manual

Page: 53 / 240

Power On Host Using the Power Button
Caution -
Data loss. An immediate shutdown abruptly closes all applications and files without
saving changes.
Caution -
To completely power off the server, you must disconnect the power cords from the
back panel of the server.
Power On Host Using the Power Button
1.
Ensure that the power supplies are connected to a power source and that the OK
status indicator is blinking.
2. Verify that the server is in Standby power mode.
3. Locate the Power button on the front panel.
Note -
The Power button is recessed on most systems.
Refer to your installation guide for the exact location.
4.
Press the power button.
Use a stylus or other pointed, non-conducting object if necessary.
The host boots and the server enters Full power mode. The OK status indicator goes steady ON
when the host is fully booted.
Power Host On and Off (Oracle ILOM)
You can use Oracle Integrated Lights Out Manager (ILOM) to remotely the host power on or
off.
Before You Begin
This procedure provides web and command-line interface (CLI) instructions for a server service
processor (SP).
■
Log in to Oracle ILOM. For instructions on how to log in to Oracle ILOM, see “Accessing
Oracle ILOM” on page 38 .
Controlling Server Power 53