Oracle X4 series Administration Manual Download Page 24

Page: 24 / 240

Oracle System Assistant Overview

With the Oracle System Assistant utility, you can:

■

Install supported operating systems and update them with the latest drivers and supported

tools.

■

Get the latest available system BIOS, Oracle ILOM, supported operating systems, firmware,

tools, and drivers from Oracle. An Internet connection is required.

■

Update the system BIOS, Oracle ILOM, and Oracle-certified device drivers for optional

accessory cards and other system hardware.

■

Configure the Oracle ILOM service processor (SP) and BIOS.

■

Display system overview and server hardware inventory information.

■

Configure RAID 0, RAID 1, RAID 5, or RAID 10 for servers that contain an integrated LSI

disk controller.

■

Access the Oracle System Assistant (Linux) shell terminal window, allowing use of the

runtime environment.

■

Access Oracle Hardware Management Pack commands (using the Oracle System Assistant

shell).

■

Access server-specific documentation.

■

Disable Oracle System Assistant.

Oracle X4 Series Servers Administration Guide • April 2016

Summary of Contents for X4 series

















































































































































































































































Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands

Oracle X4 series, Administration Manual

Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands