Oracle X4 series Administration Manual Download Page 66

Page: 66 / 240

Modify iSCSI Virtual Drive Properties in Legacy BIOS Boot Mode (BIOS)

Modify iSCSI Virtual Drive Properties in Legacy

BIOS Boot Mode (BIOS)

Before You Begin

■

You should be familiar with iSCSI theory of operation and with iSCSI server setup

procedures.

■

Refer to the operating system documentation to verify that iSCSI targets can be mounted on

a client.

■

Ensure that you have access to an external iSCSI server running on a supported operating

system.

■

The server must be in Legacy BIOS Boot Mode, not UEFI Boot Mode. For servers in

UEFI Boot Mode, use

“Modify iSCSI Virtual Drive Properties in UEFI Boot Mode

(BIOS)” on page 72

■

Provide iSCSI target parameters. The following table shows examples:

Item

Example

Target name

iqn.1988-12.com.oracle:

platform

-target

iSCSI initiator name

iqn.1988-12.com.oracle:0010E02E458F

Note -

iSCSI requires iSCSI Qualified Names (iqn)

formats for its initiator and target names.

Logical Unit Number

LUN 0

IP address of iSCSI server

192.167.1.24 (IPv4)

Port number

3260

Access the BIOS Setup Utility.

Boot the system.

Boot messages scroll across the console screen.

Press the F2 key (or Ctrl +E from a serial terminal) continuously.

The BIOS Setup Utility main screen appears.

Select Advanced and then select Legacy iSCSI.

Oracle X4 Series Servers Administration Guide • April 2016

Summary of Contents for X4 series

















































































































































































































































Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands

Oracle X4 series, Administration Manual

Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands