Oracle X4 series Administration Manual Download Page 72

Page: 72 / 240

Modify iSCSI Virtual Drive Properties in UEFI Boot Mode (BIOS)

■

Select Cancel if no CHAP service is available.

Select OK.

The iSCSI Port Configuration window appears.

12.

Select Save changes and Exit.

See Also

■

“Access the BIOS Setup Utility Menus” on page 190

■

“Select UEFI Boot Mode or Legacy BIOS Boot Mode (BIOS)” on page 198

Modify iSCSI Virtual Drive Properties in UEFI Boot

Mode (BIOS)

Use this task to configure iSCSI virtual drives using the iSCSI BIOS Setup Utility screens on

systems configured to use UEFI Boot Mode.

iSCSI virtual drives are used primarily to run supported operating systems that reside on an

external server and that function as the local server host operating system.

iSCSI virtual drives must be configured in the UEFI BIOS Setup Utility iSCSI screens.

Before You Begin

■

You should be familiar with iSCSI theory of operation and with iSCSI server setup

procedures.

■

Refer to the operating system documentation to verify that iSCSI targets can be mounted on

a client.

■

You need access to an external iSCSI server running on a supported operating system.

■

The server must be in UEFI Boot Mode, not Legacy BIOS Boot Mode. See

“Select UEFI

Boot Mode or Legacy BIOS Boot Mode (BIOS)” on page 198

■

You must provide iSCSI target parameters. The following table shows examples:

Item

Example

Target name

iqn.1988-12.com.oracle:

platform

-target

Oracle X4 Series Servers Administration Guide • April 2016

Summary of Contents for X4 series

















































































































































































































































Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands

Oracle X4 series, Administration Manual

Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands