Oracle X4 series Administration Manual Download Page 150

Page: 150 / 240

Launch Oracle System Assistant (Oracle ILOM)

Launch Oracle System Assistant (Oracle ILOM)

Use the following procedure to launch Oracle System Assistant from Oracle ILOM through a

remote KVM session established to the server.

Before You Begin

■

Admin (a) and Console (c) role privileges.
For instructions on how to log in to Oracle ILOM as a root user, see

“Accessing Oracle

ILOM” on page 38

■

Power off the host operating system on the managed server prior to performing this

procedure; otherwise, Oracle ILOM prompts you to power off the host operating system

prior to launching Oracle System Assistant.

■

Ensure that the requirements for launching and using the Oracle ILOM Remote System

Console are met.
For more information about these requirements, see

“Launch a Remote System Console

Redirection Session” on page 43

This procedure provides instructions for accessing Oracle System Assistant from a remote

KVM session on the Oracle ILOM SP.

To launch Oracle System Assistant:

■

From the Web interface:

Click System Information > Summary.

Click the Launch button for Oracle System Assistant.

Tip -

The Launch button is located in the Actions panel that appears on the right side of page.

Note -

If the Software License Agreement (SLA) dialog box appears instead of the Oracle

System Assistant window, click Accept in the SLA dialog box to continue launching Oracle

System Assistant.

150

Oracle X4 Series Servers Administration Guide • April 2016

Summary of Contents for X4 series

















































































































































































































































Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands

Oracle X4 series, Administration Manual

Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands