Oracle X4 series Administration Manual Download Page 87

Page: 87 / 240

Assign System Identification Information (Oracle Hardware Management Pack)

Assign System Identification Information (Oracle

Hardware Management Pack)

Use Oracle Hardware Management Pack to modify system identification information from your

operating system command line:

Use the

ilomconfig modify identification

command to modify the following

parameters.

■

SP Hostname

■

System Identifier

■

SP System Contact

■

SP System Location

See Also

For details, see the Oracle Hardware Management Pack Documentation Library at

http://www.

oracle.com/goto/ohmp/docs

Configuring Oracle ILOM Network Settings

These tasks configure the network settings used by Oracle ILOM to access networks. They

include:

■

“Configure SP Network Settings (Oracle System Assistant)” on page 88

■

“Modify Oracle ILOM SP Network Settings (Oracle ILOM)” on page 90

■

“Configure SP Network Address (BIOS)” on page 92

Performing Initial Setup Actions for Server Management

Summary of Contents for X4 series

















































































































































































































































Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands

Oracle X4 series, Administration Manual

Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands