24
Sun Network QDR InfiniBand Gateway Switch Service Manual for Firmware Version 2.1 • March 2013
Related Information
■
“Display Oracle ILOM Sensor Status” on page 18
■
“Determine Oracle ILOM Sensor Target Types” on page 20
■
“Evaluating a Voltage Sensor Alarm” on page 20
■
“Evaluating a Speed Sensor Alarm” on page 26
■
“Evaluating a State Sensor Alarm” on page 29
■
“Evaluating a Presence Sensor Alarm” on page 30
■
“Evaluating an Indicator State” on page 32
▼
Evaluate a Temperature Sensor
1. Display the sensor status and determine the target type.
See:
■
“Display Oracle ILOM Sensor Status” on page 18
■
“Determine Oracle ILOM Sensor Target Types” on page 20
2. Compare the displayed value with a known good range.
See
“Temperature Sensor Values” on page 24
.
3. Learn why a temperature sensor might alarm and take action.
See
“Temperature Out of Range” on page 25
.
Related Information
■
“Temperature Sensor Values” on page 24
■
“Temperature Out of Range” on page 25
Temperature Sensor Values
This table lists typical values and acceptable ranges for the temperature sensors. You
use this table in conjunction with the target and value you recorded in
“Display
Oracle ILOM Sensor Status” on page 18
. If your temperature sensor’s value is near a
boundary or outside of the acceptable range, refer to
“Temperature Out of Range” on
page 25
.
Temperature Sensor Target
Typical Value
Acceptable Range
/SYS/MB/T_BACK
30˚C
25 to 70˚C
/SYS/MB/T_FRONT
29˚C
25 to 70˚C
