Detecting and Managing Faults
9
▼
Display Faulty Components (
/SP/faultmgmt
)
1. Access the Oracle ILOM CLI.
See
“Access the Oracle ILOM CLI (NET MGT Port)” on page 35
.
2. Display any faulty components.
where:
■
x
is the target sequence number (starting at
0
).
■
faulted_target
is the Oracle ILOM target of the faulty component.
Note –
If there are several faulty components, then their respective targets are listed
with increasing target sequence numbers.
Note –
If no number is displayed, there are no faulty components.
For example:
3. Display details of the fault.
where:
■
x
is the target sequence number (starting at
0
).
->
show -d targets /SP/faultmgmt
/SP/faultmgmt
Targets:
x
(
faulted_target
)
->
->
show -d targets /SP/faultmgmt
/SP/faultmgmt
Targets:
0 (/SYS/PSU0)
->
->
show -d properties /SP/faultmgmt/
x
/faults/
y
