Detecting and Managing Faults
7
Related Information
■
“Front Panel LEDs” on page 2
■
“Rear Panel LEDs” on page 3
■
“Check Chassis Status LEDs” on page 4
■
“Check NET MGT Port Status LEDs” on page 4
■
“Check Link Status LEDs” on page 5
■
“Check Fan Status LEDs” on page 7
▼
Check Fan Status LEDs
The fan status LEDs are located in the lower right corner of the fans at the front of
the gateway chassis. See
“Front Panel LEDs” on page 2
.
1. Visually inspect the fan status LEDs.
2. If the LED is lit, there is a fault with that fan.
See
“Servicing Fans” on page 55
.
Related Information
■
“Front Panel LEDs” on page 2
■
“Rear Panel LEDs” on page 3
■
“Check Chassis Status LEDs” on page 4
■
“Check NET MGT Port Status LEDs” on page 4
■
“Check Link Status LEDs” on page 5
■
“Check Power Supply Status LEDs” on page 6
Managing Faulty Components
If Oracle ILOM has detected a fault with a component, you can display and clear that
fault with these topics:
■
“Display Faulty Components (fault_state)” on page 8
■
“Display Faulty Components (/SP/faultmgmt)” on page 9
■
“Clear a Fault Manually” on page 10
■
“Clearable Fault Targets” on page 11
