Oracle Sun Blade X6275, Service Manual

Page: 27 / 116

2-1
C H A P T E R
2
Preparing to Service the System
This chapter describes how to prepare the
Sun Blade X6275 server module
for
servicing. This includes preparatory service procedures, a list of required tools and
supplies, and information about obtaining up-to-date supported components and
part numbers.
The following basic procedures describe how to prepare the server module for
service. The procedures describe how to safely remove the server module from the
chassis and how to remove the server module’s top cover. These procedures are
referenced throughout this manual.
The following topics are covered:
■
Section 2.1, “Safety Information” on page 2-2
■
Section 2.2, “Required Tools” on page 2-2
■
Section 2.3, “Obtaining the Serial Number” on page 2-3
■
Section 2.4, “Powering Off the Server Module” on page 2-4
■
Section 2.5, “Removing the Server Module From the Sun Blade Chassis” on
page 2-7
■
Section 2.6, “Performing Electrostatic Discharge and Antistatic Prevention
Measures” on page 2-9
■
Section 2.7, “Removing the Server Module Top Cover” on page 2-11
■
Section 2.8, “Using the Multi-Port Dongle Cable” on page 2-12
■
Section 2.9, “Setting the Locate LED” on page 2-14