Oracle MICROS Workstation 5A, Setup Manual

Page: 55 / 183

2-20 Workstation 5A Setup Guide - Fourth Edition
Workstation 5A BIOS
ODM
BIOS Version Q2011d, shown below adds the ‘Compact Flash’ field.
Figure 2-17: BIOS ODM Menu - Version Q2011d
Special Configuration
Each field and the supported BIOS Versions are listed below.
Boot Test Image (All BIOS Versions)
On a Windows Embedded CE 6.0 R3 Workstation 5A, the default of
[Normal] causes the BIOS to boot from the USB Hard Drive installed on
2x5 header J8.
To boot from a USB thumb drive attached to the IO Panel, set this field to
[Alternate], then select Save Settings and Restart. Selecting [Alternate]
removes power from the USB Hard Drive header, J8 to allow the
workstation to boot from a USB Thumb Drive connected to the IO panel
for purposes of performing a BIOS upgrade.
Cash Drawer Voltage (All BIOS Versions)
This selection determines the Cash Drawer Solenoid voltage, +12V or
+24V. The default selection of +12V is compatible with all MICROS cash
drawers.
Personality Module (All BIOS Versions)
This field determines the location of the persistent registry, based on the
Operating System configuration.
For Windows Embedded CE 6.0, this field is set to [CF].
For WIN32, this field is not valid. The registry resides with the operating
system, located on either the USB Hard Drive or optional SATA Disk
Drive.