Oracle MICROS Workstation 5A, Setup Manual

Page: 46 / 183

Workstation 5A Setup Guide - Fourth Edition 2-11
Workstation 5A BIOS
Boot
Windows POSReady 2009 Boot Configuration (Q1000g and
Q1010m)

Reload USB WIN32 Factory Default Settings (Q2010g and
Q2011d)
This selection populates the boot order for WIN32 operating systems such
as POSReady 2009 when installed on a USB Hard Drive.
0 - [SMART eUSB USB Device] <- USB Hard Drive Brand/Model
1 - [IDE 0/Pri Master] CF Card Optional (not installed)
2 - [PXE Boot]
3 - [None]
Reload SATA WIN32 Factory Default Settings (Q2010g/Q2011d)
This selection, available in BIOS version Q2010g or later, populates the
boot order to start a WIN32 OS such as POSReady 2009 from the optional
SATA Solid State Drive.
0 - [SATA drive 0, INTEL SSDSA2M040G2GC] <- SATA Drive
Brand/Model.
1 - [IDE 0/Pri Master] CF Card Optional (not installed)
2 - [PXE Boot]
3 - [None]
Configuring BIOS Q1000g to boot from a SATA Disk
To boot from a SATA disk drive, move ‘SATA drive 0’ to the top of the
BBS as shown above. If converting a USB Hard Drive configuration to a
SATA SSD, the USB Hard Drive should be removed from J8 and not
included in the boot order.
When complete, proceed to the Exit menu and be sure to select the ‘Save
Setting and Restart.’
IDE Drive Configuration
The IDE 0 and IDE 1 type selection are set to [Autoconfig] to support the CF
card, the only IDE device supported.
Intel ICH 8M ATA Controller Configuration
Enables the ICH8M SATA and PATA controllers.