manualshive.com logo in svg

Oracle Application Server 10.1.3.4, User Manual

Share
Download
Oracle Application Server 10.1.3.4 User Manual Download Page 55

Modeling Interactions for OracleAS Adapter for IMS/DB

Installing and Configuring the OracleAS Adapter for IMS/DB

2-41

Figure 2–19

The Import Metadata screen

After performing the import, you can view the metadata in the Metadata tab in Oracle 
Studio. You can also make any fine adjustments to the metadata and maintain it, as 
necessary.

Setting Up an Oracle Connect Adapter

To work with the Oracle Connect against the IMS/DB data source from Oracle 
Application Server, you need to set up an adapter definition on the IBM z/OS 
platform to handle the interactions to and from the IMS/DB data.

Perform the following steps to setup the adapter:

1.

From the 

Start

 menu, select, 

Programs

, 

Oracle

, and then select 

Studio

.

2.

From the Design perspective, Configuration view expand the 

Machines

 folder.

3.

In the Configuration view, expand the computer defined in 

"Setting Up the IBM 

z/OS Platform in Oracle Studio"

 on page 2-14.

4.

Expand the 

Bindings

 folder.

5.

Expand the 

NAV

 binding.

6.

Right-click 

Adapters

 and select 

New Adapter

 to open the New Adapter wizard.

7.

Enter a name for the back-end adapter.

8.

Select 

Database

 as the back-end adapter type from the 

Type

 list. The Database 

adapter enables accessing the IMS/DB data source from Oracle Application 
Server.

Note:

The word 

event

 is a reserved word and cannot be used 

when naming an adapter.

Summary of Contents for Application Server 10.1.3.4











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands