manualshive.com logo in svg

Oracle Application Server 10.1.3.4, User Manual

Share
Download
Oracle Application Server 10.1.3.4 User Manual Download Page 103

Resolving Specific Errors

Troubleshooting OracleAS Adapter for IMS/DB

7-17

J0071: Bad key for mapped record,  #element or #element[] is required

Cause:  

In a PUT operation, the value must be mapped record array.

Action:  

Change the key used in the record to a valid key.

J0072: Value must be of type Object[]

Cause:  

In a PUT operation, the value must be mapped record array.

Action:  

Change the value used in the operation to a valid value.

J0078: In nonpersistent connection and the nonkeep alive encryption is not 

supported - ignored
Cause:  

Encryption is not supported for nonpersistent connections.

Action:  

There is no action to take. This warning can be ignored.

J0079: Invalid argument passed to %s - Argument: %s, Value: %s

Cause:  

The value pass.

Action:  

Change the argument used to a number.

Summary of Contents for Application Server 10.1.3.4











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands