manualshive.com logo in svg

Oracle Application Server 10.1.3.4, User Manual

Share
Download
Oracle Application Server 10.1.3.4 User Manual Download Page 16

Installing Oracle Connect on an IBM z/OS Series Platform

2-2

Oracle Application Server Adapters for IMS/DB User's Guide

Software Requirements

The following table summarizes the software requirements for Oracle Connect:

Installing Oracle Connect on an IBM z/OS Series Platform

This section explains how to install Oracle Connect. This section includes the 
following:

■

Installation Worksheet

■

Preinstallation Tasks

■

Importing the Installation Kit

■

Installation Instructions

■

Post-Installation Instructions

Table 2–1

Oracle Connect Hardware Requirements

Hardware Component

Requirements

Processor

An IBM zSeries computer.

Memory

The minimum requirement is 4MBfor each connection. A 
connection is defined as a connection to a server process or 
daemon. The actual memory requirement depends on such 
things as the size of the database and the number of databases 
accessed.

Disk Space (3380 and 
3390 disks)

150 cylinders.

Table 2–2

Oracle Connect Software Requirements

Software Component

Requirements

Operating System

IBM z/OS

CICS TP Monitor (if 
accessing IMS/DB data 
under CICS)

V4R1 or higher (recommended to use CICS V6R1 or higher)

CICS EXCI support must be installed and IRCSTRT=YES must 
be specified in the CICS initialization parameters, so that the IRC 
(Inter Region Communication) starts.

You can also set the IRC to open by issuing the following 
command: 

CEMT SET IRC OPEN

. Also the IBM group 

DFH$EXCI (or an equivalent user-defined group) must be 
installed in the CICS region: using the CEDA RDO facility.

TCP/IP

The operating system must support the TCP/IP protocol for 
using the Internet

C Runtime Library

The C runtime library  has all the standard C runtime programs.

Oracle Application 
Server

Oracle Application Server 10

g

 (10.1.3.4).

Summary of Contents for Application Server 10.1.3.4











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands