Oracle Application Server 10.1.3.4, User Manual

Page: 24 / 170

Installing Oracle Connect on an IBM z/OS Series Platform
2-10 Oracle Application Server Adapters for IMS/DB User's Guide
■
Access to an Open z/OS segment (that defines access to TCP/IP OA sockets).
■
ALTER
authority on datasets under
INSTROOT
(to access to read, write,
allocate and delete datasets under
INSTROOT
).
■
The installation includes a PS,
INSTROOT .DEF.GBLPARMS
, that contains global
environment information. This PS is read at startup and the correct software
version is used, based on the details provided in the startup task.
If you change the location of this member, you must also change the relevant cards
in the following jobs to the new locations:
■
ATTSRVR
: located in an active proclib, such as
user.proclib
■
ATTDAEMN
: located in an active proclib, such as
user.proclib
■
NAVSQL
: located in
INSTROOT .USERLIB
■
The input during the installation procedure is written to
nnn .BUILDKIT.SRC(PARS)
. You can use this file to provide the same inputs if
you rerun the installation, where nnn is the high-level qualifier you assign for the
installation.
■
For information about specifying Oracle Connect as the service using port
2551
in
the TCP/IP network services file, consult TCP/IP documentation.
Starting the Daemon
Activate
INSTROOT .USERLIB(ATTDAEMN)
as a started task to invoke the daemon.
For example, in the SDSF screen enter the following:
'/s ATTDAEMN'
Where INSTROOT
is the high-level qualifier where Oracle Connect is installed.
To submit the daemon as a job, uncomment the first two lines of the
ATTDAEMN
JCL,
change the PARM line as described earlier, and run the job using the subcommand.
The
ATTDAEMN
JCL is similar to the following:
//*ATTDAEMN JOB 'RR','TTT',MSGLEVEL=(1,1),CLASS=A,
//* MSGCLASS=A,NOTIFY=&SYSUID,REGION=8M
//STEP1 EXEC PGM=IRPCD,
// PARM='-B START IRPCDINI'
//* PARM='-B -L :8883 START'
//STEPLIB DD DSN=INSTROOT.LOADAUT,DISP=SHR
//SYSPRINT DD SYSOUT=A
//GBLPARMS DD DSN=INSTROOT.DEF.GBLPARMS,DISP=SHR
// EXEC PGM=IRPCD,COND=((1,EQ,STEP1),(2,EQ,STEP1)),
// PARM='-KATTDAEMN START ''INSTROOT.DEF.IRPCDINI'''
//STEPLIB DD DSN=INSTROOT.LOADAUT,DISP=SHR
//SYSPRINT DD SYSOUT=A
//GBLPARMS DD DSN=INSTROOT.DEF.GBLPARMS,DISP=SHR
//SYSDUMP DD DUMMY
Setting Up Oracle Connect for Reentrancy
All Oracle Connect load modules are reentrant to enable sub-tasking. Therefore, move
INSTROOT .LOAD
to the Link Pack Area (LPA).
Where
INSTROOT
is the high-level qualifier where Oracle Connect is installed.
Using the LPA reduces real storage usage (because everyone shares the LPA copy) and
fetch time.