manualshive.com logo in svg

Oracle Application Server 10.1.3.4, User Manual

Share
Download
Oracle Application Server 10.1.3.4 User Manual Download Page 125

Metadata for the IMS/DB Data Source

Advanced Tuning of the Metadata

A-7

Indexes Tab

Use the 

Indexes

 tab to specify metadata describing the indexes of a table.

The 

Indexes

 tab is shown in the following figure:

Figure A–3

The Indexes tab

This tab has two sections. The first section lets you define the index keys for the 
columns in the table. The bottom of the tab lists the properties for each of the columns 
at the top.

The following sections describe the 

Indexes

 tab:

■

Table Information

■

Properties

Table Information

The following table describes the fields for the top part of the tab, which defines the 
indexes used for the table.

Note:

The Indexes tab contains information only if the 

Organization

 field in the Table tab is set to 

Index

.

Summary of Contents for Application Server 10.1.3.4











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands