manualshive.com logo in svg

Oracle Application Server 10.1.3.4, User Manual

Share
Download
Oracle Application Server 10.1.3.4 User Manual Download Page 42

Modeling Interactions for OracleAS Adapter for IMS/DB

2-28

Oracle Application Server Adapters for IMS/DB User's Guide

Perform the following steps to apply filters.

1.

Apply filters to the copybooks, as needed.

The following is theApply Filters editor.

Figure 2–13

Apply Filters Screen

The following COBOL filters are available: 

■

COMP_6 switch: The MicroFocus COMP-6 compiler directive. Specify either 

COMP-6’1’

 to treat COMP-6 as a COMP data type or 

COMP-6’2’

 to treat 

COMP-6 as a COMP-3 data type.

■

Compiler source: The compiler vendor.

■

Storage mode: The MicroFocus Integer Storage Mode. Specify either 
NOIBMCOMP for byte storage mode or IBMCOMP for word storage mode.

■

Ignore after column 72: Ignore columns 73 to 80 in the COBOL copybooks.

■

Ignore first 6 columns: Ignore the first six columns in the COBOL copybooks.

■

Prefix nested column: Prefix all nested columns with the previous level 
heading.

■

Replace hyphens (-) in record and field names with underscores (_): A hyphen, 
which is an invalid character in Oracle metadata, is replaced with an 
underscore.

■

Case sensitive: Specifies whether to consider case sensitivity or not.

■

Find: Searches for the specified value.

■

Replace with: Replaces the value specified for in the Find field with the value 
specified here.

The following DBD filters are available:

■

Ignore after column 72: Ignore columns 73 to 80 in the COBOL copybooks.

Summary of Contents for Application Server 10.1.3.4











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands