manualshive.com logo in svg

Oracle Application Server 10.1.3.4, User Manual

Share
Download
Oracle Application Server 10.1.3.4 User Manual Download Page 157

Workspaces

Advanced Tuning of the Daemon

C-17

8.

Right-click the daemon and select 

Recycle Servers

. Any servers in the connection 

pool are closed and new servers start with the new configuration.

The 

Security

 tab is shown in the following figure:

Figure 8–8

The Security Tab

The 

Security

 tab has the following fields:

Notes:

■

You can also change daemon settings using the Configuration 
Explorer, by selecting a computer and scrolling the list to the 
required daemon. Right-click the daemon and select 

Edit 

Daemon

.

■

Changes made to the daemon configuration are not 
implemented. They are only implemented after the 
configuration is reloaded using the 

Reload Configuration

 

option in the Runtime Manager.

Summary of Contents for Application Server 10.1.3.4











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands