AO SERIES | INSTRUCTIONS MANUAL
43
This device must not be used in an application where its failure could cause a hazard to
human health or damage to other equipment. Keep in mind that if the device is used in
a manner not foreseen by the manufacturer, the protection provided by its circuits and
by its enclosure may be impaired.
This is a low voltage power supplied device. As such, the potential difference between
any combination of applied signals must not exceed the supply voltage at any time.
Higher voltages may cause a fault and can be dangerous to human health.
This device has limited protection against transients caused by inductive loads. If
necessary, use external protection devices like fast diodes or better still, specific
transient protectors.
Do not allow foreign objects to enter the unit or drop into holes, terminals and other
openings or gaps. This may cause fire or electric shock, possibly resulting in serious
injury.
Disconnect the power cable before moving the product. Failure to comply with this
precaution may damage the power cable, cause fire or electric shock, possibly resulting
in serious injury.
Do not scratch, cut, open or twist the power cables. It may cause malfunctioning, fire or
electric shock, possibly resulting in serious injury.
If the power cable is damaged or cracked, please contact our assistance service and do
not use the product. Damaged cables may cause malfunctioning, fire or electric shock,
possibly resulting in serious injury.
Do not insert or remove the plug of the power cable with wet hands. It may cause
electric shock, possibly resulting in serious injury.
Do not use the product in the presence of inflammable gas. It may cause outbreaks and
flames, possibly resulting in serious injury.
Should you notice any abnormality such as a smell, smoke or overheating, turn off
the power and disconnect the power cables. Continuing to use the product in these
conditions may cause fire or electric shock, possibly resulting in serious injury.
If you have dropped the product or damaged the product case, turn off the power and
disconnect the power cables. Continuing to use the product in these conditions may
cause fire or electric shock, possibly resulting in serious injury.
The device generates
high voltage
internally. The user must be careful and avoid
touching either the internal electronics or the active optical surface. When the device is
switched off energy remains stored in the internal capacitors for at least 2 minutes.
DANGER
: Risk of electric shock
