6
UsiNG YOUR ViBROFit ONE – MANUAL PROGRAM
Connect the power cord to the appliance and switch on the red power
switch located at the back of the appliance. The screen will display “----”
representing standby mode.
Press the “START/STOP” button to initiate the manual program.
Press the “+” or “-” button on the right to adjust speed levels while the program
is running.
The program automatically stops once the time you have set is reached.
Note:
Press the “START/STOP” button if you wish to stop the program
midway.
To switch the appliance to standby mode, press the “POWER” button. The
screen will display “----” representing standby mode.
To turn off the appliance, switch off the red power switch located at the back
of the appliance.
Press the “POWER” button to turn on the appliance.
Press the “+” or “-” button on the left to adjust the time. The maximum time
limit is 10 minutes.
1
4
5
6
7
8
2
3
