OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 1.0.1 dated 2015-05-27
Page 9
Original operating instructions
TU3008 | TU3008V
GB
1.3
Intended use
WARNING!
Improper use of the lathe will result in
will endanger personnel,
will endanger the lathe and other material property of the operator,
the correct function of the lathe may be affected.
The lathe is designed and manufactured to be used in environments where there is no poten-
tial danger of explosion.
The lathe is designed and manufactured for longitudinal and straight turning of round and regu-
lar formed
three-, six- or twelve-square workpieces in cold metal. The lathe must only be installed and
operated in a dry and ventilated place.
If the lathe is operated in any way other than described above or modified without the authori-
zation of Optimum Maschinen Germany GmbH, the lathe is no longer being operated in accord-
ance with its intended use.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee or CE conformity will expire, if any constructive, tech-
nical or procedural changes are not performed by the company Optimum Maschinen Germany
GmbH.
It is also part of intended use that you
observe the limits of the lathe,
the operating manual is observed,
the inspection and maintenance instructions are observed.
"Technical data“ on page 18
In order to achieve optimum cutting performance, it is essential to choose the right turning tool,
feed, tool pressure, cutting speed and coolant.
WARNING!
Severe injuries due to non-intended use.
It is forbidden to make any modifications or alternations to the operation values of the
lathe. They could endanger the personnel and cause damage to the lathe.
INFORMATION
The TU3008V lathe is built according to the standard DIN EN 61800-3 Class C2 .
Class C2 is intended for operation in use mixed areas, where the power is supplied via a public
low voltage supply system.
1.4
Reasonably foreseeable misuses
Any other use other than that specified under "Intended use" or any use beyond the described
use shall be deemed as non-intended use and is not permissible.
Any other use has to be discussed with the manufacturer.
The lathe must not be used to process metal, cold and non-inflammable materials.
In order to avoid misuse, it is necessary to read and understand the operating instructions
before first commissioning.
The lathe operator must be qualified.
"Target group private users“ on page 11
