OPTIMUM
M A S C H I N E N - G E R M A N Y
Assembly
Version 1.0.1 dated 2015-05-27
Page 21
Original operating instructions
TU3008 | TU3008V
GB
3
Assembly
3.1
Unpacking the machine
Transport the lathe in its packing crate to a place near its final installation location with a forklift
before unpacking it. If the packaging shows signs of possible transport damage, take the nec-
essary precautions not to damage the machine when unpacking. If any damage is discovered,
the carrier and/or shipper must immediately be notified of this fact to establish any claim which
might arise.
Inspect the machine completely and carefully, making sure that all materials, such as shipping
documents, manuals and accessories supplied with the machine have been received.
3.2
Scope of delivery
When the lathe is delivered, please check immediately that it has not been damaged during
transport.
Also check that no fastening screws have come loose. Compare the scope of delivery with the
attached packing list.
3.3
Transport
WARNING!
Severe or fatal injuries may occur if parts of the machine tumble or fall down from the
forklift truck or from the transport vehicle. Follow the instructions and information on
the transport box. Note the total weight of the lathe. Use only transport and load
suspension devices that can hold the total weight of the lathe.
WARNING!
The use of unstable lifting and load suspension equipment that might break under load
can cause severe injuries or even death. Check that the lifting and load suspension gear
has sufficient load capacity and that it is in perfect condition. Fasten the loads properly.
Never walk under suspended loads!
