OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 1.0.1 dated 2015-05-27
Page 11
Original operating instructions
TU3008 | TU3008V
GB
WARNING!
The lathe may only be used with the safety devices activated. Disconnect the lathe
immediately whenever you detect a failure in the safety devices or when they are not
mounted!
"Safety devices“ on page 12
1.6
Qualification
1.6.1 Target group private users
The machine can be used in the private domain. The acumen of people in the private sector
with training in metal working was taken into consideration for creating this operation manual.
Vocational training or further instruction in a metal working profession is a prerequisite for safe
operation of the machine. It is essential that the private user is aware of the dangers involved in
operating this machine. We recommend visiting a training course in the operation of lathes.
Your specialist dealer can offer you an appropriate training course. These courses are also
offered by adult education centres in Germany.
1.6.2 Obligations of the User
The user must
have read and understood the operating manual,
be familiar with all safety devices and regulations,
be able to operate the lathe.
1.6.3 Additional requirements regarding the qualification
Additional requirements apply for work on electrical components or equipment:
Must only be performed by a qualified electrician or person working under the instructions
and supervision of a qualified electrician.
Before starting work on electrical parts or operating agents, following measures are to be per-
formed in the following order:
disconnect all poles
secure against restarting
check that there is no voltage
1.7
Operator positions
The operator position is in front of the lathe.
