OPTIMUM
M A S C H I N E N - G E R M A N Y
Operation
Version 1.0.1 dated 2015-05-27
Page 32
Original operating instructions
TU3008 | TU3008V
GB
4.4
Switching the machine off
Set the rotation direction switch to the neutral central position.
If the lathe has been shut off for a longer period of time, switch it off using the main switch
and secure it against being unintentionally switched on again or pull the power plug from
the TU3008.
"Disconnecting and securing the lathe“ on page 16
CAUTION!
The emergency stop mushroom switch may only be activated in an emergency. A normal
shut-down of the machine must not be executed using the emergency stop switch.
4.5
Resetting an emergency stop condition
Unlock the emergency stop switch again.
Set the rotation direction switch to the neutral central position.
Select turning direction.
Switch on spindle rotation.
4.6
Power failure, Restoring readiness for operation
Set the rotation direction switch to the neutral central position.
Select turning direction.
Switch on spindle rotation.
4.7
Speed setting
ATTENTION!
Change the gearbox settings only when the machine is not in operation.
Adjust the speed by changing the position of the V-belt on the pulleys. With the TU3008V, the
speed can be regulated within the corresponding speed ranges using a frequency converter.
The speed can then be adjusted using the potentiometer on the control panel of the lathe.
4.7.1 Speed tables
TU8030
TU8030V
