Optimum B 24 H Operating Manual Download Page 7

Page: 7 / 100

OPTIMUM

M A S C H I N E N - G E R M A N Y

Safety

Version 2.2.2 dated 2014-03-07

Page 7

Original operating instructions

B24H | B24HV | B28H | B28HV

1.1.2 Other pictograms

ATTENTION!

Situation that could cause damage to the drilling machine and products and
other types of damage.

No risk of injury to people.

Information

Application tips and other important or useful information and notes.

No dangerous or harmful consequences for people or objects.

Ideogram

Warning alert

Definition / consequence

In case of specific dangers, we replace the pictogram by

general danger

by a warning of

injury of hands,

hazardous electri-

cal voltage,

rotating parts.

Warning of danger of slip-

ping!

Warning risk of stumbling!

Warning hot surface!

Warning biological hazard!

Warning of automatic start-

up!

Warning tilting danger!

Warning of suspended

loads!

Caution, danger of explo-

sive substances!

Activation forbidden!

rise to the machine prohib-

ited

Read the operating instruc-

tions before commission-

ing!

Disconnect the mains plug!

Use protective glasses!

Use protective gloves!

Use protective boots!

Use protective suit!

Summary of Contents for B 24 H





































































































Search results

Summary of Contents for B 24 H

Reviews:

Related manuals for B 24 H

Brands by name

Popular brands

Optimum B 24 H, Operating Manual

Search results

Summary of Contents for B 24 H

Reviews:

Related manuals for B 24 H

Brands by name

Popular brands