manualshive.com logo in svg

Optimum B 24 H, Operating Manual

Share
Download
Optimum B 24 H Operating Manual Download Page 44

OPTIMUM

M A S C H I N E N   -   G E R M A N Y

Operation

Version 2.2.2  dated 2014-03-07

Page 44

Original operating instructions

B24H | B24HV | B28H | B28HV

GB

4.9

Disassembly, assembly of drill chucks and drill bits

4.9.1 Use of Quick action drill chuck

The drill chuck consists of two
parts(No. 1 and No. 2). 

Hold the upper part (No.1) 
of the drill chuck. With the 
lower part (No. 2) of the drill 
chuck one can firm and/or 
loose-turn the cheeks of the 
drill chuck. 

Turn the tool (drill) firmly.

Img.4-15:

Quick action drill chuck

CAUTION!

Make sure that the clamped tool is firmly and correctly fitted.

4.9.2 Disassembly of the drill chuck B24H - B24HV

The drill chuck and the taper mandrel are loosened from the drill spindle by means of a drill
drift.

WARNING!

Disassemble the drill chuck only when the drilling machine is disconnected from the
electrical power supply.

Switch off the drilling 
machine with the main 
switch or disconnect the 
power plug.

Move the drill sleeve 
down.

Turn the drilling spindle so 
that the opening at the 
drilling spindle sleeve 
coincides with the open-
ing at the drilling spindle.

Loosen the taper mandrel 
of the drill chuck with the 
help of a drill drift.

Img.4-16:

Disassembly B24H - B24HV

upper part (No.1)

quick action drill

chuck

lower part (No.1)

quick action drill

chuck

Tool (drill)

Drill drift

Drill sleeve

upper part quick

action drill chuck

lower part quick

action drill chuck

Summary of Contents for B 24 H





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands