manualshive.com logo in svg

Optimum B 24 H, Operating Manual

Share
Download
Optimum B 24 H Operating Manual Download Page 56

OPTIMUM

M A S C H I N E N   -   G E R M A N Y

Maintenance

Version 2.2.2  dated 2014-03-07

Page 56

Original operating instructions

B24H | B24HV | B28H | B28HV

GB

as required

Co

olan

t un

it 

/ Ch

ip

 fil

ter

Ch

eck / 

cl

ean

Cooling pump:

The cooling pump is almost maintenance free. Replace the 
cooling agent in regular intervals and adapted to the usage.

When using coolants which are leaving remnants it is nec-
essary to rinse the cooling pump.

Chip filter:

Clean the chip filter. To do so, unscrew the chip container 
and remove the chips or other soiling.

Suck the old cooling agent off with a suitable industrial suc-
tion cup over the charging hole.

Fill in new coolant over the chip tray. The maximum capac-
ity of the coolant is about 3,5 litres.

Abb.6-5: Cooling pump/ Chip filter B28H Vario

Interval

Where?

What?

How?

Cooling pump

 
Chip filter

Filler hole

Summary of Contents for B 24 H





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands