OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 2.2.2 2014-3-7
98
Original operating instructions
B28HV
GB
EC - Declaration of Conformity
Machinery Directive 2006/42/EC Annex II 1.A
The manufacturer /
retailer:
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D- 96103 Hallstadt
hereby declares that the following product,
Type of machine:
Upright drilling machine
Type designation:
B28HV
Serial number:
_ __ __ __ __
Year of manufacture:
20__
Manual upright drilling machine with belt drive and frequency converter for private persons as well as for
craft and industrial plants which meets all the relevant provisions of the above mentioned Directive 2006/
42/EC as well as the other directives applied (below) including their amendments in force at the time of
declaration. The following other EU Directives have been applied: EMC Directive 2004/108/EC, Low Volt-
age Directive 2006/95/EC
The safety objective meet the requirement of EC Directive 2006/95/EC
The following harmonized standards were applied:
EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up
EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for
design and selection
EN 61800-5-1 Adjustable speed electrical power drive systems 2008-04 + correction 2
EN 61800-3:2012-09 Adjustable speed electrical power drive s correction 1
EN 12717:2001+A1:2009 Safety of machine tools - Drilling machines
EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines
EN 50581:2012 Technical documentation for the assessment of electrical and electronic products with
respect to the restriction of hazardous substances
EN 60204-1:2006/AC: 2010 Safety of machinery - Electrical equipment of machines - Part 1: General
requirements (IEC 60204-1:2005 (modified))
EN 61000-6-2:2005/AC:2005 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity
for industrial environments (IEC 61000-6-2:2005)
EN 61000-6-4:2007 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard
for industrial environments (IEC 61000-6-4:2006)
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduc-
tion (ISO 12100:2010)
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by
upper and lower limbs
Responsible for documentation: Kilian Stürmer, phone: +49 (0) 951 96555 - 800
Address:
Dr.-Robert-Pfleger-Str.26D - 96103 Hallstadt
Hallstadt, 08/02/2013
Kilian Stürmer
(CEO, General manager)
