OPTIMUM
M A S C H I N E N - G E R M A N Y
Maintenance
Version 2.2.2 dated 2014-03-07
Page 57
Original operating instructions
B24H | B24HV | B28H | B28HV
GB
INFORMATION
The spindle bearing is lifetime-lubricated. It is not necessary to lubricate it again.
6.3
Repair
Request for a service technician of the company Optimum Maschinen Germany GmbH for all
repairs.
If the repairs are carried out by qualified technical staff, they must follow the indications given in
these operating instructions.
The company Optimum Maschinen Germany GmbH does not take responsibility nor does it
guarantee for damages and failures resulting of non-observance of this operating manual.
For repairs only use
faultless and suitable tools
only original parts or parts from series expressly authorised by Optimum Maschinen Ger-
many GmbH.
as required
S
p
in
dl
e re
tu
rn
s
p
ri
ng
Read
justing
CAUTION!
Parts will throw out at high pressure. When disas-
sembling the key housing, please make sure that
the machine is only maintained and prepared by
qualified staff.
Abb.6-6:
Spindle return spring
Abb.6-7:
Exploded view spring housing
Interval
Where?
What?
How?
spring barrel
circlip
Spiral spring
spring barrel
circlip
