OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 2.2.2 dated 2014-03-07
Page 16
Original operating instructions
B24H | B24HV | B28H | B28HV
GB
1.14
Safety during operation
We specially point out the specific dangers when working with and on the drilling machine.
WARNING!
Before switching on the drilling machine make sure that there are
no dangers generated for persons,
not cause damage to equipment.
Avoid any risky working practices:
Make sure that nobody is endangered by your work.
The instructions mentioned in these operating instructions have to be strictly observed dur-
ing assembly, operation, maintenance and repair.
Do not work on the drilling machine, if your concentration is reduced, for example, because
you are taking medication.
Observe the accident prevention regulations issued by your Employers Liability Insurance
Association or other competent supervisory authority, responsible for your company.
Inform the supervisor about all endangerments or errors.
Stay on the drilling machine until the machine completely stopped moving.
Use the prescribed personnel protective equipment. Make sure to wear a well-fitting work
suit and, if necessary, a hairnet.
Do not use protective gloves when drilling or milling.
1.15
Safety during maintenance
Inform the operators in good time about any maintenance and repair works.
Report all safety relevant changes and performance details of the drilling machine or their oper-
ational behavior. Document all changes, have the operating instructions updated accordingly
and train machine operators.
1.15.1 Disconnecting and securing the drillnig machine
Switch off the drilling machine with the main switch and secure the main switch with a padlock-
against unauthorised switching-on or switching-on by accident.
All machine parts as well as any dangerous voltages are switched off. Excepted are only the
positions which are marked with the adjoining pictogram.
1.16
Using lifting equipment
WARNING!
The use of unstable lifting and load suspension gear that might break under load can
cause severe injuries or even death.
Check that the lifting and load suspension gear
they have sufficient load carrying
and that it is in perfect condition.
Observe the accident prevention regulations issued by your Employers Liability
Insurance Association or other competent supervisory authority, responsible for your
company.
Fasten the loads properly. Never walk under suspended loads!
