- 7 -
♦ Network requirements
▶ You may need Ethernet switch (L2 or L3) as a switching hub or router for connecting
multiple IPVDS -500-EDs on Local LAN or Intranet. Network speed of each port of Ethernet
switch requires 100/1000Mbps and the network switch has to support Jumbo frame and
multicasting protocol between L3 Switch.
▶ For technical support, visit Opticis web site, www.opticis.com, or contact
▶ But, point-to-point connection between one pair of IPVDS-500-ED can be directly
connected (with CAT5e or CAT6) without network switch.
♦ Control PC requirements
▶ You need to check OS version of your PC for Video Wall Control SW.
▶ Requirements: Window7 or higher version (Optionally including Window XP)
♦ AC / DC Power Adapter Technical Advisory
▶ The IPVDS-500-ED is designed to use mainly ex5V AC / DC power adaptor. The
internal power supplied through a HDMI pin (#18) from the graphic source is used to
identify normal connection between a source and TX, IPVDS-500-E.
6.
Connector descriptions
▶ 5V AC / DC Power (TX & RX):
Connect the 5V AC / DC Power Adaptor to the connector of each device. When the 5V
AC/DC Power Adaptor is connected to the device, the power LED is turned on. For more
information on LEDs, refer to “LED indication”.
▶ HDMI IN (TX)
: Connect a video source (such as a PC) to HDMI IN receptacle over HDMI cable.
▶ HDMI OUT (RX)
: Connect a digital display to HDMI OUT receptacle over HDMI cable.
▶ Local Display (TX)
: Connect a digital display to Local Display receptacle over HDMI cable.
▶ RJ-45 (TX & RX)
: Connect a RJ-45 network cable (CAT5e / CAT6) to the connector.