![background image](http://html1.mh-extra.com/html/opticis/ipvds-500-d/ipvds-500-d_user-manual_1641660015.webp)
- 15 -
Note: User can see the present Firmware version of the selected device on the right area.
(4) Click ‘Upload’ button (Do not 5V power adapter until it is completed).
Please wait until LED blinking stops and then the device will be rebooted.
Note: You can see a pop up message when it is completed. It takes about 3 minutes for TX
and 5 minutes for RX.
[Figure 8 – Firmware upgrade]
▶ Upgrade Firmware by using USB
(1) Copy “IPVDS-500.bin” into an USB memory stick.
(2) Insert the USB memory stick into any USB A ports on the selected TX or RX.
(3) Re-plug the +5V power adapter into the power jack of selected TX or RX. (IPVDS-500-E or
D)
(4)
Please wait until LED blinking stops and then the device will be rebooted. It takes about 3
minutes for TX and 5 minutes for RX (Do not unplug DC power until it completes).
(5)
Remove the USB memory stick from TX or RX (IPVDS-500-E or D).
♦ View: There are Device, Layout, and Log section and user can change set size of each
section.
♦ Help: User can check the version of Video Wall Controller SW (PC Program).