- 22 -
Note: Please be aware while using ‘EDID write’ function. It may be black out with unsuitable
EDID data to displays.
(1) Select ( ) all TXs or one (all hosts recommended).
(2) Click ‘EDID write’ button.
▶ EDID write from default EDID data
After checking the default EDID data on either HDMI or DVI on the top right ( ), you can
write the default EDID data to all TXs or selected one.
(1) Select and check Default value either HDMI or DVI. ( )
(2) Click ‘EDID write’ button to ( ) all TXs (all hosts recommended).
▶ ‘Reboot’ button: Possible to re-boot selected device on the network if necessary
3) Client device setup and Display configuration on ‘Display Placement’ Page
If its first time installing the Video Wall displays or trying to change MxN set, you need to visit
‘Display Placement’ Page.
[Figure 16
–
Display Placement page setup
]