- 23 -
♦ Client Device Setup (Network setup )
You can edit and setup client devices with Context menu (with mouse right click ) on the
left section or on Ribbon menu.
(1) Select one of DHCP IP and Static IP. If you select DHCP IP mode, network information of
selected device is set automatically.
(2) To change network information of client devices, select one of listed devices, and modify
IP address, gateway, and subnet mask of the devices in static IP mode.
(3) Click ‘Save & Reboot’ button ( ) to save the modification in client devices (RX).
(4) Repeat (2)~(3) to change network information of all client devices.
▶ ‘Reboot’ button: Possible to re-boot selected device on the network if necessary.
♦ Display Configuration (all displays recommended)
You can set display configuration on the ‘Display Placement’ Page with Ribbon menu or
Context menu (mouse right click menu ).
[Figure 17 – Display setup]