95
Other Y(II) or yield function buttons
Y(II) Measuring Screen 1p Test Data Collection Control
Data Logging
- retains all measured values when turned on.
Save All Traces
-To save all trace data for all up coming measurements, the “Save All
Traces” button must be turned on from the “Log Setup” screen. The instrument default
setting is "Off".
Kwik-Name –
the “Logging File” name is the file name. “Kwik-Name” allows one to
quickly create a new file name without typing in the characters. The name is a code that
represents the year -10, the month -11, the date 29, and the hour – 15 (24 hour clock).
This is especially valuable for people making measurements in high volume that want to
change the file name for a second field or sub set. The parameters stay the same as the
existing file, and the code allows easy tracking where appropriate. Press the “Kwik-
Name” button and the Kwik name becomes the “logging file name” moving forward.
Current Sample
– Press the “Current Sample #” button to change the measurement
number before you measure. The number that you enter will appear on the next
measurement. A key pad will appear. Enter the new number, and press “Ent” (enter).
Reset Sample #
- resets the sample number to 1 for the next measurement.
Save Trc
on the Y(II) measuring screen, saves the trace displayed on the measurement
screen, or the last trace. It is not saved normally, unless it is turned on in the Data logging
collection screen shown above.
Del Last –
Deletes the last measurement.
Measure –
Measurements can be made by pressing the measuring button on the Y(II)
measuring screen, or the red button at the tip of the fiber optic cable, or the black button
on the bottom of the PAR Clip.
