87
Y(II) Measuring Screen Y(II) Measurement Pulse Setup Screen
By pressing the
Flash Width
button one goes to a keyboard screen and allows the
saturation pulse duration to be adjusted between 0.1 and 2.0 seconds. Press “Ent”
Either the center or right image below, will provide optimal results with the OS1p.
Flash Zoom
– This button allow a choice between displaying the Y(II) trace on a partial
basis or displaying the full saturation pulse trace and the subsequent trailing fluorescence
data after the saturation pulse. The default setting is to display the partial trace for
reasons of speed. To view the trailing edge of the saturation pulse adds time to the
measurement.
In the “Off” position, one sees only the leading edge and part of the top of the trace. By
turning the Flash Zoom “On”, it allows the viewing of each graphic measurement trace to
be displayed completely. The “
Tail Width
” button allows one to select the amount of
trailing fluorescence data to be displayed. By pressing the “Tail Width” button, a key
board will be displayed that allows adjustment from zero to 9.9 seconds after the
saturation pulse is turned off. Press “Ent” enter value.
