56
Function name
LCD display
Setting range
(Initial value)
Explanation
Lighting ON/OFF
LIGHT ON
0, 1
(1)
0
: Turns OFF internal lighting. (External
lighting remains ON.)
1
: Turns ON internal lighting.
LCD Up/Down
reverse
★
LCDVIEW
0, 1
(0)
0
: Normal LCD display
1
: Displays the display of LCD display upside
down (Image screen is not reversed.)Set to
“1” when mounting this device upside down.
The display of the remote monitor reverses
only the image screen.
Set value
initialization
enable
INITIALIZ
0 – 15
(0)
When the device is powered ON with “
15
” set
as this set value and and pressed at the
same time, all the set values, registered screens,
brightness irregularity data are initialized.
10
: All set values will be locked.
11
: Locked condition of all set values is
released.
Communication
setting
COMMUNIC
0 – 5
(0)
Sets communication function.
0
: Communication function is not used.
1-5
: Communication function is used.
1
: 4800 bps
2
: 9600 bps
3
: 19200 bps
4
: 38400 bps
5
: 57600 bps
Data length is 8 bit without parity bit, and stop
bit is 1bit.When using this communication
function, the external lighting remote monitor
function cannot be used.
Set value copy
BANKCOPY
0 – 14
(0)
Set values and registered screens of present bank
are copied to the bank of the target bank No. set
by this setting. During execution, imaging and
judgment are stopped. This set value will be “
0
”
when powered OFF.
★
:Patent pending
Ramco Innovations
www.optex-ramco.com
phone 800-280-6933
