41
4
The following screens will be displayed alternately.
The color detection
window blinks.
The status of the color
detection window or the
masking window of the
applied function used last
time is reflected.
The colors from the
brightest color to the
darkest color are set as
the detection colors.
The function item of the color selection menu is
displayed.
Pressing
will display the next function while
pressing
will display the previous function.
Other than the functions to move the position of the
color detection window and change the window size,
a function to change the color range is also available.
See "Function of Color Selection & Mask Edition
Menu" ( Page 58) for details of the function.
The color in the color
detection window is
displayed. The "darkest
color" is shown on the left
and the "brightest color"
is shown on the right.
[XX], if displayed, shows
that no detection color is
registered.
6
Confirm that
▲
UP MOVE
is
displayed. (Press
or
several
times if other function is displayed.)
7
Move the color detection window
down as far as the center of the
quadrangle at the lower right in the
screen by holding
pressed.
If the color detection window has moved down
too much, move it upward by pressing
.
USE OF APPLIED FUNCTIONS
Ramco Innovations
www.optex-ramco.com
phone 800-280-6933
