Optex CVS2 Instruction Manual Download Page 49

Page: 49 / 71

CHANGING SET VALUE

Set value changes

to red.

Press

for 3 seconds or more.

The set value change screen is displayed.

Change the set value by pressing

and

: Value increments by “1”.
: Value decrements by “1”.

Press

for 3 seconds or more.

The set value is entered and the set value
reference screen is restored. Pressing

will

restore the set value reference screen, canceling

the revision to the set value.

Press

The standard screen is restored.

Initializing Set Value

Initializing Set Value

Change the value of the set item

INITIALIZ

to “

”.

Turn OFF the power supply

temporarily and turn it ON again with

and

pressed simultaneously.

The right screen is displayed.

Do not turn OFF the power supply until the

device restarts.

Ramco Innovations

www.optex-ramco.com

phone 800-280-6933

Summary of Contents for CVS2








































































Search results

Summary of Contents for CVS2

Reviews:

Related manuals for CVS2

Brands by name

Popular brands

Optex CVS2, Instruction Manual

Search results

Summary of Contents for CVS2

Reviews:

Related manuals for CVS2

Brands by name

Popular brands