Optex CVS2 Instruction Manual Download Page 30

Page: 30 / 71

Select

MASK EDITOR

pressing

MASK EDITOR

is displayed in yellow.

Press

for 3 seconds or

more.

MASK EDITOR

is executed and the

mask edition menu is displayed.

The following screens are displayed

alternately.

The masking

window blinks.

The status of the

color detection

window of the

applied function

used last time is

reflected.

The function item of the mask edition menu is

displayed.

Pressing

will display the next function while

pressing

will display the previous function.

Other than the functions to move the position of the

masking window and change the window size, a

function to change the color range is also available.

See "Function of Color Selection & Mask Edition

Menu" ( Page 58) for details of the function.

Ramco Innovations

www.optex-ramco.com

phone 800-280-6933

Summary of Contents for CVS2








































































Search results

Summary of Contents for CVS2

Reviews:

Related manuals for CVS2

Brands by name

Popular brands

Optex CVS2, Instruction Manual

Search results

Summary of Contents for CVS2

Reviews:

Related manuals for CVS2

Brands by name

Popular brands