Deleting Group ID
Auto Switch Function
15
4. Press [▲ ] or [▼] to input a 9-digit ID number, then press [ENT].
Press [CH/WX] or [16] to move the cursor forward or backward.
Press [CLR] to cancel and exit the programming mode.
Notice: The first one digit is specified ‘0’ for Group ID. The first two
digits are ‘0’ for Coast station ID.
5. Press [▲ ] or [▼] to input a 10-character ID name.
Press [CH/WX] or [16] to move the cursor forward or backward.
Press [CLR] to cancel and exit the programming mode.
6. Press [ENT] to save setting and return to normal operation.
1. Press [MENU] to enter the DSC menu.
2. Press [▲] or [▼] to select “ADDRESS”, then press [ENT].
3. Press [▲] or [▼] to select “DEL GROUP ID”, then press [ENT].
When no group ID is programmed, “NO ID” is displayed.
4. Press [▲] or [▼] to select a desired ID name for deleting, then
press [ENT], “READY” appears.
5. Press [ENT] to delete the selected group ID and return to
normal operation.
By regulation, after receiving a Distress call, the transceiver basically
switches the operating channel to Channel 16. However, when this
setting is set to “OFF,” the function enables the transceiver to remain
on the operating channel even after receiving a Distress call.
1. Press [MENU] to enter the DSC menu.
2. Press [▲] or [▼] to select “AUTO SW”, then press [ENT].
3. Press [▲] or [▼] to select the Auto Switch “ON” or “OFF”(Default
“ON”).
Press [CLR] to cancel and exit the setting.
ON: The transceiver automatically switches the operating
channel to Channel 16 after receiving a Distress call.
OFF: The transceiver remains on the operating channel even
after receiving a Distress call.
4. Press [ENT] to save setting and return to normal operation.
Scrolls
Summary of Contents for KV-290
Page 37: ...VHF MARINE RADIO CHANNEL LIST 34...
Page 39: ...ONWA MARINE ELECTRONICS CO LTD...
