Onwa KV-290, Installation Manual

Page: 10 / 39

8 .
Weather Channel Icon 12 .
→
“WX” appears when a weather channel is selected.
→
9 .
Duplex Icon
10 .
TAG Channel Icon 11 .
Appears when a duplex channel is selected.
Appears when a TAG channel is selected.
Channel Comment Display 13 .
→
7
Low Battery Icon
DSC Icon
→ “DSC”appears when a DSC call is received.
7
.
GPS Icon
→ Appears while valid position data is received.
→ Disappears when no GPS receiver is connected.
Call Channel Icon
Channel Group Icon
5
.
6
.
Appears when the Call channel is selected.
Indicates whether U.S.A. “USA”, International “INT” or Canadian
“CAN” channel group is selected.
Appears when the battery voltage drops to approximately 10.8V or
below.
“POS REPLY” appears when a Position Reply call or a
Position Report Reply call is received.
→
“WX ALT” appears when the weather alert function is in use;
blinks when an alert tone is received.
Channel comment appears if programmed.
“SC” blinks during priority scan; “SCAN” blinks during normal
scan.
“DW” blinks during Dual-watch; “TW” blinks during Tri-watch.
→
→